Acephate 97UP Insecticide

When treating a severe infestation of Chinch Bugs on a Golf Course, what is the recommended application rate?

• 0.9 to 1.5 oz. ✓
• 0.75 oz.
• 0.8 to 1.4 oz.
• 0.4 to 0.8 oz.

Answer: The label specifies a rate of 0.9 to 1.5 oz. for Chinch Bugs on Golf Courses.

🔗 Source

For Sod Farm users, how much time must elapse between the final application and harvesting sod?

• 24 hours
• 7 days
• 3 days ✓
• 15 days

Answer: The restrictions state: 'For Sod Farms, allow at least 3 days to elapse between final application and harvesting sod.'

🔗 Source

When controlling Black Turfgrass Ataenius (except CA) on a Golf Course, what is the instruction regarding irrigation?

• Do not irrigate after application.
• Irrigate heavily to ensure penetration.
• Irrigate lightly after application (not more than 1/2 inch). ✓
• Wait 3 days before irrigating.

Answer: For Black Turfgrass Ataenius on Golf Courses, the label says: 'Irrigate lightly after application (not more than 1/2 inch).'

🔗 Source

According to the label, which of the following sites is NOT listed as a location for Leafhopper control?

• Golf Courses
• Sod Farms
• Turfgrass
• Residential Lawns ✓

Answer: The label only lists Turfgrass (Golf Courses and Sod Farms only) for Leafhopper control.

🔗 Source

What is the minimum amount of water required per 1,000 sq. ft. when applying the product to control Cutworms on a Sod Farm?

• 4 gallons
• 5 gallons
• 15 gallons ✓
• 1 to 15 gallons

Answer: The label requires a minimum of 15 gallons of water per 1,000 sq. ft. for Cutworm control on Sod Farms.

🔗 Source

If applying Acephate 97UP to control Greenbugs or Grasshoppers, what is a specific timing/maintenance restriction?

• Do not irrigate for 24 hours.
• Do not mow turfgrass for at least 24 hours after application. ✓
• Apply only during the early morning.
• Do not apply more than once per season.

Answer: The notes for Greenbug and Grasshopper applications state: 'Do not mow turfgrass for at least 24 hours after application.'

🔗 Source

What is the maximum allowable product application limit per acre for Sod Farms?

• 3.09 lbs. product/A ✓
• 4.12 lbs. product/A
• 1.5 oz. per 1,000 sq. ft.
• 15 gallons per 1,000 sq. ft.

Answer: The restrictions state: 'Do not apply more than 3.09 lbs. product/A for Sod Farms...'

🔗 Source

Which application method is explicitly prohibited by the label?

• Airblast application in California for certain turf types ✓
• Ground spray application
• Evening application
• Application after irrigation

Answer: The restrictions state: 'Do not apply aerially' and specifically prohibit 'Airblast application' for certain turf/golf course uses in California.

🔗 Source